Get the right pumping system for the job.
Southern Irrigation has the full range of dewatering pumps for your next pumping project.
Quality products from Tsurumi, Little Giant and Franklin will allow you to pump with ease, knowing that these pumps are built to last.
Get the right pumping system for the job.
Southern Irrigation has the full range of dewatering pumps for your next project.
Quality products from Tsurumi, Little Giant and Franklin will allow you to pump with ease, knowing that these pumps are built to last.
Little Giant – Sump Pumps
A sump pump is your first defense against water damage at home or work. Little Giant sump pumps are reliable and come in different sizes and options to fit your needs. They’re more than just pumps—they’re essential protection.
5.5 SERIES
BASEMENT SUMP PUMP
6 SERIES
BASEMENT SUMP PUMP
BSC33V AUTOMATIC
SUBMERSIBLE SUMP PUMP
5 SERIES
SUBMERSIBLE UTILITY PUMP
Little Giant – Sump Pumps
A sump pump is your first defense against water damage at home or work. Little Giant sump pumps are reliable and come in different sizes and options to fit your needs. They’re more than just pumps—they’re essential protection.
5.5 SERIES
BASEMENT SUMP PUMP
6 SERIES
BASEMENT SUMP PUMP
BSC33V AUTOMATIC
SUBMERSIBLE SUMP PUMP
5 SERIES
SUBMERSIBLE UTILITY PUMP
Tsurumi – Dewatering Submersible Pumps
A world leader in submersible pumps in the construction and rental market.
HS SERIES MANUAL ELECTRIC PUMPS
The HS series tough trash pumps are the most common pump found in contractors’ trucks as it’s capable of pumping water that contains sand, solids, and debris with minimal wear and clogging. It comes in 2 or 3-inch discharge with 1/2HP or 1HP options.
With a built-in shaft-mounted agitator, solids stay suspended, ensuring smooth operation.
Featuring a durable urethane semi-vortex impeller and dual inside mechanical seal with SiC faces for long life.
The patented Oil Lifter provides essential lubrication, while the V-ring seal design protects against abrasive particles.
- Motor Output (HP): 1/2
- Phase: Single
- Discharge Bore (in.): 2
- Voltage/Amp: 110/5.4
- Cable Length (ft.): 20
- Dimension (Dia x H, in.): 10-1/16 x 12-15/16
- Continuous Running Water Level (in.): 3.5
- Pump Weight (lbs.): 30
- Motor Output (HP): 1
- Phase: Single
- Discharge Bore (in.): 3
- Voltage/Amp: 115/9.6
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 12-7/16 x 15-1/4
- Continuous Running Water Level (in.): 3.5
- Pump Weight (lbs.): 49
LB SERIES MANUAL ELECTRIC PUMPS
LB Series pumps are designed for maximum efficiency; their top discharge provides maximum motor cooling efficiency, allowing continuous duty operation at low levels and extended dry-run capacity.
They fit seamlessly into an 8″ pipe, enabling swift site dewatering. By lowering the water level on-site, contractors can bid farewell to mud-filled workdays. It’s practical, it’s efficient, and it’s the solution contractors have been waiting for.
- Motor Output (HP): 2/3
- Phase: Single
- Discharge Bore (in.): 2
- Voltage/Amp: 110/6.1
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 7-11/16 x 11-1/4
- Continuous Running Water Level (in.): 2
- Pump Weight (lbs.): 28
NK SERIES MANUAL ELECTRIC PUMPS
The NK Series pump is built to be beat up.
It features synthetic rubber wear parts for maximum longevity and efficiency, and the continuous-duty air-filled motor ensures reliability even under heavy use, while the ductile iron semi-vortex impeller handles tough conditions effortlessly.
Plus, with dual voltage options and a terminal board for easy switching between 110V and 220V, flexibility is at your fingertips.
- Motor Output (HP): 2
- Phase: Single
- Discharge Bore (in.): 3
- Voltage/Amp: 110/23.0
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 9-7/16 x 24-1/2
- Continuous Running Water Level (in.): 3-1/4
- Pump Weight (lbs.): 80
Tsurumi – Dewatering Submersible Pumps
As a world leader of submersible pumps to the construction and rental market, Tsurumi outlasts the competition in pump life, product offering and cost savings.
HS SERIES MANUAL ELECTRIC PUMPS
The HS series tough trash pumps are the most common pump found in contractors’ trucks as it’s capable of pumping water that contains sand, solids, and debris with minimal wear and clogging. It comes in 2 or 3-inch discharge with 1/2HP or 1HP options.
With a built-in shaft-mounted agitator, solids stay suspended, ensuring smooth operation.
Featuring a durable urethane semi-vortex impeller and dual inside mechanical seal with SiC faces for long life.
The patented Oil Lifter provides essential lubrication, while the V-ring seal design protects against abrasive particles.
- Motor Output (HP): 1/2
- Phase: Single
- Discharge Bore (in.): 2
- Voltage/Amp: 110/5.4
- Cable Length (ft.): 20
- Dimension (Dia x H, in.): 10-1/16 x 12-15/16
- Continuous Running Water Level (in.): 3.5
- Pump Weight (lbs.): 30
- Motor Output (HP): 1
- Phase: Single
- Discharge Bore (in.): 3
- Voltage/Amp: 115/9.6
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 12-7/16 x 15-1/4
- Continuous Running Water Level (in.): 3.5
- Pump Weight (lbs.): 49
LB SERIES MANUAL ELECTRIC PUMPS
LB Series pumps are designed for maximum efficiency; their top discharge provides maximum motor cooling efficiency, allowing continuous duty operation at low levels and extended dry-run capacity.
They fit seamlessly into an 8″ pipe, enabling swift site dewatering. By lowering the water level on-site, contractors can bid farewell to mud-filled workdays. It’s practical, it’s efficient, and it’s the solution contractors have been waiting for.
- Motor Output (HP): 2/3
- Phase: Single
- Discharge Bore (in.): 2
- Voltage/Amp: 110/6.1
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 7-11/16 x 11-1/4
- Continuous Running Water Level (in.): 2
- Pump Weight (lbs.): 28
NK SERIES MANUAL ELECTRIC PUMPS
The NK Series pump is built to be beat up.
It features synthetic rubber wear parts for maximum longevity and efficiency, and the continuous-duty air-filled motor ensures reliability even under heavy use, while the ductile iron semi-vortex impeller handles tough conditions effortlessly.
Plus, with dual voltage options and a terminal board for easy switching between 110V and 220V, flexibility is at your fingertips.
- Motor Output (HP): 2
- Phase: Single
- Discharge Bore (in.): 3
- Voltage/Amp: 110/23.0
- Cable Length (ft.): 32
- Dimension (Dia x H, in.): 9-7/16 x 24-1/2
- Continuous Running Water Level (in.): 3-1/4
- Pump Weight (lbs.): 80
Non-Clog Submersible Pumps
FRANKLIN ELECTRIC – 3NC + 4NC SERIES DISCHARGE PUMPS
The Franklin Electric discharge non-clog pump deals with a variety of commercial and industrial applications, including sewage, effluent, irrigation, and general dewatering needs.
Engineered for rugged reliability, this pump offers simplified on-site maintenance with its field-adjustable wear plate, reducing operational downtime and minimizing costs.
With factory standard dual silicon carbide mechanical seals, enjoy up to 6 times longer seal life, ensuring durability and performance even in demanding conditions.
3NC Series 3-Inch
- 3″ horizontal flange discharge (125# ANSI flange)
- Maximum solids size: 2.5″
- Power cable – 8/4 -type SOOW– 30′ & 50′
- Sensor cable – 16/4 – type SOOW – 30’ & 50′
- Class F motor insulation
- Continuous duty motor (104 °F maximum)
- Lower double row ball bearing
- 300 series SST motor shaft
- Seal-fail indication probe
- 300 series SST fasteners
- Cast iron motor housing, volute, and seal chamber
- Fluoroelastomer (FKM) sealing system for motor enclosure
- Mechanical seals: Dual silicon carbide
- Additional exclusion seal
- Agency listing: cCSAus
4NC Series 4-Inch
- 4″ horizontal flange discharge (125# ANSI flange)
- Maximum solids size: 3″
- Power cable – 8/4 -type SOOW– 30′ & 50′
- Sensor cable – 16/4 – type SOOW – 30’ & 50′
- Class F motor insulation
- Continuous duty motor (104 °F maximum)
- Lower double row ball bearing
- 300 series SST motor shaft
- Seal-fail indication probe
- 300 series SST fasteners
- Cast iron motor housing, volute, and seal chamber
- Fluoroelastomer (FKM) sealing system for motor enclosure
- Mechanical seals: Dual silicon carbide
- Additional exclusion seal
- Agency listing: cCSAus
Non-Clog Submersible Pumps
FRANKLIN ELECTRIC – 3NC + 4NC SERIES DISCHARGE PUMPS
The Franklin Electric discharge non-clog pump deals with a variety of commercial and industrial applications, including sewage, effluent, irrigation, and general dewatering needs.
Engineered for rugged reliability, this pump offers simplified on-site maintenance with its field-adjustable wear plate, reducing operational downtime and minimizing costs.
With factory standard dual silicon carbide mechanical seals, enjoy up to 6 times longer seal life, ensuring durability and performance even in demanding conditions.
3NC Series 3-Inch
- 3″ horizontal flange discharge (125# ANSI flange)
- Maximum solids size: 2.5″
- Power cable – 8/4 -type SOOW– 30′ & 50′
- Sensor cable – 16/4 – type SOOW – 30’ & 50′
- Class F motor insulation
- Continuous duty motor (104 °F maximum)
- Lower double row ball bearing
- 300 series SST motor shaft
- Seal-fail indication probe
- 300 series SST fasteners
- Cast iron motor housing, volute, and seal chamber
- Fluoroelastomer (FKM) sealing system for motor enclosure
- Mechanical seals: Dual silicon carbide
- Additional exclusion seal
- Agency listing: cCSAus
4NC Series 4-Inch
- 4″ horizontal flange discharge (125# ANSI flange)
- Maximum solids size: 3″
- Power cable – 8/4 -type SOOW– 30′ & 50′
- Sensor cable – 16/4 – type SOOW – 30’ & 50′
- Class F motor insulation
- Continuous duty motor (104 °F maximum)
- Lower double row ball bearing
- 300 series SST motor shaft
- Seal-fail indication probe
- 300 series SST fasteners
- Cast iron motor housing, volute, and seal chamber
- Fluoroelastomer (FKM) sealing system for motor enclosure
- Mechanical seals: Dual silicon carbide
- Additional exclusion seal
- Agency listing: cCSAus
